Overview CC 400 / VCC 400 Continuous Casting Machine
Download technical data [PDF]
Quattro Drive system
Easy to control by LCD display
Flying saw (option)
CC 400 with hydraulic cutter (option)
The optional hydraulic scissors cut the material into sections during drawing
Technical data CC 400 / VCC 400 Continuous Casting Machine
| power | |
| power max. / electrical connection | 15 kW 3x400 V / 3x208 V |
| temperature max. | 1500° C |
| capacity | |
| crucible volume | 285 ccm = 2,2 kg Cu * |
| 400 ccm = 3,2 kg Cu * | |
| 700 ccm = 5,6 kg Cu * | |
| wire/tube production up to | ø 15 mm / ø 45 mm |
| sheet production up to | 50 x 8 mm / 60 x 8 mm |
| handling and control | |
| 100 programs, to select by | LCD display, full text readout |
| vacuum/inert gas overpressure | CC 400 / VCC 400 |
| neutral inert gas atmosphere | |
| optical die temperature measurement | |
| die cooler with protective gas flushing | |
| secondary cooler | |
| end bar sensor | |
| quality management | |
| RS 232, diagnostic system | |
| data printer | |
| GSM-modem for remote service | |
| accessories | |
| Quattro drawing unit | |
| center alignment | |
| sinter kit (for diffusion bonding) | |
| granulating unit | |
| bending unit | |
| simultaneous casting of several wires | |
| hydraulic cutter | |
| flying saw | |
| * liquid metal up to top level of the crucible | |
= standard equipment | = not available | = optional
All machine descriptions and technical data published on this site make no claim to be complete. They are subject to change and therefore they are not basis of contract.
